Welcome to the NSN RFQ page on Cosmos Purchasing; from here, you may request a competitive sourcing solution for any parts of interest. As a dependable NSN part in our inventory of Synchro Transmitter items, this component with part number 9011805 and NSN 5990000101413 is available for purchase at any time. This product is manufactured by Air Force Lifecycle Management, a trusted entity on our Approved Vendor List (AVL) who upholds a strict level of quality assurance in their practices. They are also a part of a larger supply network that reaches across the globe to enable expedited shipping for our customers wherever they are located.
Note : We Will Not Share Your Information To Any Third Parties.
Having been given the CAGE Code 97151, Air Force Lifecycle Management follows the strict guidelines for part standardization established by the US Department of Defense. If you would like to explore similar products, we invite you to return to our page of 5990 Synchros and Resolvers products or look at the list of related items below. Start the purchasing process on part number 9011805 and any other items of interest today to learn all that Cosmos Purchasing can do as your sourcing partner!
| NSN | FSC | NIIN | CLS | Hazmat | DEMIL | Cancelled NSN |
|---|---|---|---|---|---|---|
| 5990-00-010-1413 Item PartTypeName: SYNCHRO,TRANSMITTER | 5990 | 000101413 | 0 | N | ||
| CIIC | HCC | ESD | PMIC | Criticality | ENAC | |
| U | U | |||||
| Part Number | ISC | RNVC | RNCC | HCC | MSDS | SADC |
| 1497015-0001 | 1 | 9 | 5 |
| MRC | Criteria | Characteristic |
|---|---|---|
| AAQL | BODY STYLE | STANDARD ROUND C |
| AAVH | SHOULDER DIAMETER | 0.9995 INCHES MINIMUM AND 1.0000 INCHES MAXIMUM |
| AAVL | PILOT DIAMETER | 0.6245 INCHES MINIMUM AND 0.6250 INCHES MAXIMUM |
| ABHP | OVERALL LENGTH | 1.9800 INCHES MINIMUM AND 2.0100 INCHES MAXIMUM |
| ABKK | FLANGE DIAMETER | 1.0590 INCHES MINIMUM AND 1.0620 INCHES MAXIMUM |
| ABKU | FLANGE THICKNESS | 0.0900 INCHES MINIMUM AND 0.0960 INCHES MAXIMUM |
| ABPA | UNDERCUT DIAMETER | 0.9750 INCHES NOMINAL |
| ABPC | UNDERCUT WIDTH | 0.0500 INCHES NOMINAL |
| ABWV | SHAFT DIAMETER | 0.0800 INCHES MINIMUM AND 0.0810 INCHES MAXIMUM SINGLE SHAFT |
| ABXF | SHAFT LENGTH | 0.3600 INCHES MINIMUM AND 0.3900 INCHES MAXIMUM SINGLE SHAFT |
| AEDC | SHAFT UNDERCUT WIDTH | 0.0300 INCHES NOMINAL SINGLE SHAFT |
| AFJN | FRAGILITY FACTOR | MODERATELY RUGGED |
| AJSL | BODY SIZE | 11 |
| AJSR | ROTOR INPUT VOLTAGE RATING IN VOLTS | 26.0 NOMINAL |
| AJSS | FREQUENCY IN HERTZ | 400.0 NOMINAL |
| AJST | ROTOR INPUT CURRENT RATING | 120.0 MILLIAMPERES MAXIMUM |
| AJSV | ROTOR INPUT ELECTRICAL POWER RATING | 600.0 MILLIWATTS MAXIMUM |
| AJSW | ZRO RESISTANCE IN OHMS | 44.00 NOMINAL |
| AJSY | ZSO RESISTANCE IN OHMS | 57.00 NOMINAL |
| AJTS | ROTOR DC RESISTANCE IN OHMS | 18.00 NOMINAL |
| AJTT | STATOR DC RESISTANCE IN OHMS | 9.30 NOMINAL |
| AJVF | PHASE SHIFT ANGLE IN DEG | 4.000 INPUT TO OUTPUT NOMINAL |
| AJVH | MAXIMUM TOTAL NULL VOLTAGE OUTPUT IN MILLIVOLTS PER VOLT | 25.00 |
| AJVL | ELECTRICAL ERROR ANGULAR RANGE IN MINUTES | -15.0 TO 15.0 |
| AJVS | ACTUATOR FRICTION TORQUE AT MINUS 55 DEG CELSIUS | 1.8 CENTIMETER-GRAMS MAXIMUM |
| AJVT | ACTUATOR FRICTION TORQUE AT PLUS 25 DEG CELSIUS | 0.6 CENTIMETER-GRAMS MAXIMUM |
| AJVV | TORQUE GRADIENT PER ANGULAR DEG | 2000.0 MILLIMETER-MILLIGRAMS MINIMUM |
| AJVW | ALIGNMENT HOLE QUANTITY | 4 |
| AJWQ | PILOT LENGTH | 0.0590 INCHES MINIMUM AND 0.0650 INCHES MAXIMUM |
| AJWR | SHOULDER LENGTH | 0.0590 INCHES MINIMUM AND 0.0650 INCHES MAXIMUM |
| AJWX | MOUNTING SURFACE TO TERMINAL END DISTANCE | 1.6200 INCHES NOMINAL |
| AJYY | SHAFT THREAD SERIES DESIGNATOR | UNF SINGLE SHAFT |
| AKAF | SHAFT THREAD DIRECTION | RIGHT-HAND SINGLE SHAFT |
| AKAN | SHAFT THREAD CLASS | 3A SINGLE SHAFT |
| CQRG | BODY MATERIAL | STEEL CORROSION RESISTING |
| CQTM | TERMINAL LOCATION | REAR |
| CQXQ | PLUS J ZRO REACTANCE IN OHMS | 243.00 NOMINAL |
| CRGZ | PLUS J ZSO REACTANCE IN OHMS | 28.00 NOMINAL |
| CRJX | SHAFT TAPERED END MINOR DIAMETER | 0.0780 INCHES NOMINAL SINGLE SHAFT |
| CRSJ | SHAFT TYPE | ROUND,TAPERED,THREADED,UNDERCUT SINGLE SHAFT |
| CRSY | ALIGNMENT HOLE DEPTH | 0.0900 INCHES MAXIMUM |
| CSJY | TRANSFORMATION RATIO | 0.454 ROTOR TO STATOR NOMINAL |
| CSLT | SHAFT TAPER ANGLE IN DEG | 3.0 SINGLE SHAFT |
| CTBP | SHAFT TIP LENGTH | 0.0650 INCHES NOMINAL SINGLE SHAFT |
| CTCW | ALIGNMENT HOLE BOLT CIRCLE DIAMETER | 0.8090 INCHES MINIMUM AND 0.8150 INCHES MAXIMUM |
| CWAC | SHAFT TAPER LENGTH | 0.1370 INCHES NOMINAL SINGLE SHAFT |
| CWBH | SHAFT NOMINAL THREAD SIZE | 0.060 INCHES SINGLE SHAFT |
| CWJD | SHAFT UNDERCUT DIAMETER | 0.0440 INCHES MINIMUM AND 0.0460 INCHES MAXIMUM SINGLE SHAFT |
| TTQY | TERMINAL TYPE AND QUANTITY | 5 WIRE LEAD |
If You’re Ever Looking for NSN parts Or Have an Aircraft On Ground Situation, Don’t forget That We offer Competitive Pricing and Guaranteed On-Time Delivery.
Request for Quote