Welcome to the NSN RFQ page on Cosmos Purchasing; from here, you may request a competitive sourcing solution for any parts of interest. As a dependable NSN part in our inventory of Gearcase Motor items, this component with part number 2602 and NSN 3010006799396 is available for purchase at any time. This product is manufactured by Ducommun Labarge Technologies Inc, a trusted entity on our Approved Vendor List (AVL) who upholds a strict level of quality assurance in their practices. They are also a part of a larger supply network that reaches across the globe to enable expedited shipping for our customers wherever they are located.
Note : We Will Not Share Your Information To Any Third Parties.
Having been given the CAGE Code 08719, Ducommun Labarge Technologies Inc follows the strict guidelines for part standardization established by the US Department of Defense. If you would like to explore similar products, we invite you to return to our page of 3010 Torque Converters and Speed Changers products or look at the list of related items below. Start the purchasing process on part number 2602 and any other items of interest today to learn all that Cosmos Purchasing can do as your sourcing partner!
| NSN | FSC | NIIN | CLS | Hazmat | DEMIL | Cancelled NSN |
|---|---|---|---|---|---|---|
| 3010-00-679-9396 Item PartTypeName: GEARCASE-MOTOR | 3010 | 006799396 | 0 | N | ||
| CIIC | HCC | ESD | PMIC | Criticality | ENAC | |
| U | U | |||||
| Part Number | ISC | RNVC | RNCC | HCC | MSDS | SADC |
| 2602 | 2 | 9 | 5 |
| MRC | Criteria | Characteristic |
|---|---|---|
| AAJT | OVERALL HEIGHT | 1.375 INCHES |
| AAJU | OVERALL LENGTH | 3.385 INCHES |
| AAJV | OVERALL WIDTH | 1.124 INCHES |
| AAUB | HOLE DIAMETER | 0.0620 INCHES NOMINAL SINGLE END |
| AAZQ | HOLE DEPTH | 0.1870 INCHES NOMINAL SINGLE END |
| ABWV | SHAFT DIAMETER | 0.1874 INCHES NOMINAL SINGLE END |
| ACDC | CURRENT TYPE | DC INPUT |
| AJWZ | HOLE CENTER TO SHAFT END DISTANCE | 0.0940 INCHES NOMINAL SINGLE END |
| AKAE | MAXIMUM OPERATING ALTITUDE RATING | 75000.0 FEET |
| AKCT | SHAFT ROTATION DIRECTION | COUNTERCLOCKWISE SINGLE END |
| AKPS | DUTY CYCLE | INTERMITTENT |
| AXCP | WINDING TYPE | SERIES WOUND |
| AXGY | MOUNTING METHOD | PAD |
| AXHR | MOUNTING FACILITY TYPE AND QUANTITY | 4 UNTHREADED HOLE |
| BFLT | TIME INTERVAL | 2.0 SECONDS MAXIMUM ON AND 3.0 SECONDS MINIMUM OFF |
| BFLY | GEARED HEAD OUTPUT SHAFT ALIGNMENT POSITION | ANGLED TO ARMATURE/ROTOR AXIS SINGLE END |
| BFMF | COOLING METHOD | AIR TO AIR COOLED |
| BKPB | CURRENT RATING METHOD | LOAD |
| BKPH | TORQUE RATING AND TYPE | 2.0 INCH-POUNDS RUNNING AND 2.5 INCH-POUNDS STALLED AND 2.5 INCH-POUNDS STARTING |
| BKPP | SPEED CONTROL METHOD AND DEVICE TYPE | AUTOMATIC REMOTE |
| BKPQ | INCLOSURE SPECIFICATION | COMMERCIAL |
| CWCS | LENGTH OF SHAFT FROM HOUSING | 0.550 INCHES SINGLE END |
| CWDY | TEMP RATING | -55.0 OPERATING DEG CELSIUS AND 85.0 OPERATING DEG CELSIUS |
| CWFY | NOMINAL CENTER TO CENTER DISTANCE BETWEEN MOUNTING FACILITIES PARALLEL TO WIDTH | 0.812 INCHES |
| CWGD | NOMINAL CENTER TO CENTER DISTANCE BETWEEN MOUNTING FACILITIES PARALLEL TO HEIGHT | 0.812 INCHES |
| CWGL | CURRENT RATING IN AMPS | 0.250 SINGLE OUTPUT |
| CWGQ | CONNECTION TYPE AND VOLTAGE RATING IN VOLTS | 27.5 LINE TO NEUTRAL SINGLE INPUT |
| CWHK | GEARED HEAD OUTPUT SHAFT SPEED RATING | 33.000 SINGLE REVOLUTIONS PER MINUTE SINGLE END |
| CWHR | ANGLE OF SHAFT TO MOUNTING BASE | 90.0 DEGREES SINGLE END |
| CWHZ | SHAFT END CHARACTERISTIC | A13 SINGLE STYLE SINGLE END |
| TTQY | TERMINAL TYPE AND QUANTITY | 2 SOLDER LUG |
If You’re Ever Looking for NSN parts Or Have an Aircraft On Ground Situation, Don’t forget That We offer Competitive Pricing and Guaranteed On-Time Delivery.
Request for Quote