Welcome to the NSN RFQ page on Cosmos Purchasing; from here, you may request a competitive sourcing solution for any parts of interest. As a dependable NSN part in our inventory of Conduit Assembly Nonmetallic Ele items, this component with part number R58HB06B34A120 and NSN 5975014341754 is available for purchase at any time. This product is manufactured by Fleetwood Electronics Inc, a trusted entity on our Approved Vendor List (AVL) who upholds a strict level of quality assurance in their practices. They are also a part of a larger supply network that reaches across the globe to enable expedited shipping for our customers wherever they are located.
Note : We Will Not Share Your Information To Any Third Parties.
Having been given the CAGE Code 56963, Fleetwood Electronics Inc follows the strict guidelines for part standardization established by the US Department of Defense. If you would like to explore similar products, we invite you to return to our page of 5975 Electrical Hardware and Supplies products or look at the list of related items below. Start the purchasing process on part number R58HB06B34A120 and any other items of interest today to learn all that Cosmos Purchasing can do as your sourcing partner!
| NSN | FSC | NIIN | CLS | Hazmat | DEMIL | Cancelled NSN |
|---|---|---|---|---|---|---|
| 5975-01-434-1754 Item PartTypeName: CONDUIT ASSEMBLY,NONMETALLIC,ELE | 5975 | 014341754 | 0 | P | ||
| CIIC | HCC | ESD | PMIC | Criticality | ENAC | |
| U | A | 0 | ||||
| Part Number | ISC | RNVC | RNCC | HCC | MSDS | SADC |
| R58HB06B34A120 | 6 | 2 | 3 |
| MRC | Criteria | Characteristic |
|---|---|---|
| AAJD | THREAD CLASS | 2B BOTH ENDS" |
| ABEZ | GRIPPING ACCOMMODATION TYPE | ROUND KNURLED BOTH ENDS" |
| ABFE | HAZARDOUS LOCATIONS/ENVIRONMENTAL PROTECTION | CORROSION RESISTANT" |
| ACKE | BRAIDED METALLIC SHIELD TYPE | TINNED COPPER WIRE" |
| ACKH | MINIMUM INSIDE BENDING RADIUS | 1.000 INCHES" |
| ADAR | BODY OUTSIDE DIAMETER | 0.600 INCHES MAXIMUM" |
| ADAS | BODY INSIDE DIAMETER | 0.281 INCHES NOMINAL" |
| AGAV | END ITEM IDENTIFICATION | F-15S" |
| CQTX | TERMINAL END TYPE | PLAIN FERRULE W/COUPLING NUT BOTH ENDS" |
| CRXX | MEASURING METHOD AND LENGTH | 120.000 INCHES NOMINAL WORKING" |
| FLEX | III FLEXIBILITY | FLEXIBLE" |
| MATT | MATERIAL | ALUMINUM ALLOY COMPLETE END FITTING" |
| MATT | MATERIAL | PLASTIC BODY" |
| MATT | MATERIAL | STEEL CORROSION RESISTING CHAFING SLEEVE" |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | MIL-T-81914/4 MIL SPEC SINGLE MATERIAL RESPONSE BODY" |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | QQ-A-225/3,2011-T3 FED SPEC SINGLE MATERIAL RESPONSE COMPLETE END FITTING" |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | QQ-S-763 FED SPEC SINGLE MATERIAL RESPONSE CHAFING SLEEVE" |
| SFTT | SURFACE TREATMENT | CHROMATE COMPLETE END FITTING" |
| STDC | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | QQ-P-416,TYPE II,CLASS 3 FED SPEC SINGLE TREATMENT RESPONSE COMPLETE END FITTING" |
| AAJD | THREAD CLASS | 2B BOTH ENDS" |
| ABEZ | GRIPPING ACCOMMODATION TYPE | ROUND KNURLED BOTH ENDS" |
| ABFE | HAZARDOUS LOCATIONS/ENVIRONMENTAL PROTECTION | CORROSION RESISTANT" |
| ACKE | BRAIDED METALLIC SHIELD TYPE | TINNED COPPER WIRE" |
| ACKH | MINIMUM INSIDE BENDING RADIUS | 1.000 INCHES" |
| ADAR | BODY OUTSIDE DIAMETER | 0.600 INCHES MAXIMUM" |
| ADAS | BODY INSIDE DIAMETER | 0.281 INCHES NOMINAL" |
| AGAV | END ITEM IDENTIFICATION | F-15S" |
| CQTX | TERMINAL END TYPE | PLAIN FERRULE W/COUPLING NUT BOTH ENDS" |
| CRXX | MEASURING METHOD AND LENGTH | 120.000 INCHES NOMINAL WORKING" |
| FLEX | III FLEXIBILITY | FLEXIBLE" |
| MATT | MATERIAL | ALUMINUM ALLOY COMPLETE END FITTING" |
| MATT | MATERIAL | PLASTIC BODY" |
| MATT | MATERIAL | STEEL CORROSION RESISTING CHAFING SLEEVE" |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | MIL-T-81914/4 MIL SPEC SINGLE MATERIAL RESPONSE BODY" |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | QQ-A-225/3,2011-T3 FED SPEC SINGLE MATERIAL RESPONSE COMPLETE END FITTING" |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | QQ-S-763 FED SPEC SINGLE MATERIAL RESPONSE CHAFING SLEEVE" |
| SFTT | SURFACE TREATMENT | CHROMATE COMPLETE END FITTING" |
| STDC | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | QQ-P-416,TYPE II,CLASS 3 FED SPEC SINGLE TREATMENT RESPONSE COMPLETE END FITTING" |
If You’re Ever Looking for NSN parts Or Have an Aircraft On Ground Situation, Don’t forget That We offer Competitive Pricing and Guaranteed On-Time Delivery.
Request for Quote