Welcome to the NSN RFQ page on Cosmos Purchasing; from here, you may request a competitive sourcing solution for any parts of interest. As a dependable NSN part in our inventory of Synchro Differential Receiver items, this component with part number 526507-3 and NSN 5990000795406 is available for purchase at any time. This product is manufactured by Instruments And Flight Research Inc, a trusted entity on our Approved Vendor List (AVL) who upholds a strict level of quality assurance in their practices. They are also a part of a larger supply network that reaches across the globe to enable expedited shipping for our customers wherever they are located.
Note : We Will Not Share Your Information To Any Third Parties.
Having been given the CAGE Code 22525, Instruments And Flight Research Inc follows the strict guidelines for part standardization established by the US Department of Defense. If you would like to explore similar products, we invite you to return to our page of 5990 Synchros and Resolvers products or look at the list of related items below. Start the purchasing process on part number 526507-3 and any other items of interest today to learn all that Cosmos Purchasing can do as your sourcing partner!
| NSN | FSC | NIIN | CLS | Hazmat | DEMIL | Cancelled NSN |
|---|---|---|---|---|---|---|
| 5990-00-079-5406 Item Description: Synchro Differential Receiver | 5990 | 000795406 | 0 | N | ||
| CIIC | HCC | ESD | PMIC | Criticality | ENAC | |
| U | U | 0 | ||||
| Part Number | ISC | RNVC | RNCC | HCC | MSDS | SADC |
| 526507-3 | 5 | 2 | 5 |
| MRC | Criteria | Characteristic |
|---|---|---|
| AAFZ | BODY MATERIAL | STEEL, STAINLESS |
| AAQL | BODY STYLE | STANDARD ROUND C |
| AAVH | SHOULDER DIAMETER | 1.3120 INCHES MAXIMUM |
| AAVL | PILOT DIAMETER | 0.5000 INCHES MAXIMUM |
| ABHP | OVERALL LENGTH | 2.4440 INCHES NOMINAL |
| ABKK | FLANGE DIAMETER | 1.4370 INCHES MAXIMUM |
| ABKU | FLANGE THICKNESS | 0.0930 INCHES NOMINAL |
| ABPA | UNDERCUT DIAMETER | 1.3120 INCHES NOMINAL |
| ABPC | UNDERCUT WIDTH | 0.0780 INCHES NOMINAL |
| ABWV | SHAFT DIAMETER | 0.1200 INCHES MAXIMUM BOTH SHAFTS |
| ABXF | SHAFT LENGTH | 0.3750 INCHES NOMINAL REAR SHAFT |
| ABXF | SHAFT LENGTH | 0.4380 INCHES NOMINAL FRONT SHAFT |
| AEBZ | III SCHEMATIC DIAGRAM DESIGNATOR | 1 Y-ROTOR, 1 Y-STATOR |
| AFJN | FRAGILITY FACTOR | MODERATELY RUGGED |
| AJSL | III BODY SIZE | 15 |
| AJSN | STATOR INPUT VOLTAGE RATING IN VOLTS | 11.8 NOMINAL |
| AJSP | STATOR INPUT CURRENT RATING | 130.0 MILLIAMPERES NOMINAL |
| AJSQ | STATOR INPUT ELECTRICAL POWER RATING | 320.0 MILLIWATTS NOMINAL |
| AJSS | FREQUENCY IN HERTZ | 400.0 NOMINAL |
| AJSW | ZRO RESISTANCE IN OHMS | 15.00 NOMINAL |
| AJSY | ZSO RESISTANCE IN OHMS | 14.00 NOMINAL |
| AJTA | ZRS RESISTANCE IN OHMS | 16.00 NOMINAL |
| AJTS | ROTOR DC RESISTANCE IN OHMS | 14.00 NOMINAL |
| AJTT | STATOR DC RESISTANCE IN OHMS | 10.80 NOMINAL |
| AJVF | PHASE SHIFT ANGLE IN DEG | 6.000 OUTPUT TO INPUT NOMINAL |
| AJVH | MAXIMUM TOTAL NULL VOLTAGE OUTPUT IN MILLIVOLTS PER VOLT | 30.00 |
| AJVL | ELECTRICAL ERROR ANGULAR RANGE IN MINUTES | -20.0/+20.0 |
| AJVS | ACTUATOR FRICTION TORQUE AT MINUS 55 DEG CELSIUS | 15.0 CENTIMETER-GRAMS NOMINAL |
| AJVT | ACTUATOR FRICTION TORQUE AT PLUS 25 DEG CELSIUS | 5.0 CENTIMETER-GRAMS NOMINAL |
| AJVW | ALIGNMENT HOLE QUANTITY | 4 |
| AJWE | SHAFT RADIAL PLAY TEST POINT | 0.125 INCHES MAXIMUM |
| AJWG | SHAFT MAXIMUM RADIAL PLAY | 0.0010 INCHES |
| AJWH | SHAFT END PLAY | 0.0010 INCHES MAXIMUM |
| AJWQ | PILOT LENGTH | 0.0400 NOMINAL INCHES |
| AJWR | SHOULDER LENGTH | 0.1320 NOMINAL INCHES |
| AJWX | MOUNTING SURFACE TO TERMINAL END DISTANCE | 1.6310 INCHES NOMINAL |
| AJXB | SHAFT MAXIMUM RUNOUT | 0.0010 INCHES |
| CQTM | TERMINAL LOCATION | REAR |
| CQXQ | PLUS J ZRO REACTANCE IN OHMS | 63.00 NOMINAL |
| CQZS | SHAFT SLOT DEPTH | 0.0310 INCHES MAXIMUM BOTH SHAFTS |
| CRGZ | PLUS J ZSO REACTANCE IN OHMS | 77.00 NOMINAL |
| CRHN | SHAFT SLOT WIDTH | 0.0310 INCHES MAXIMUM BOTH SHAFTS |
| CRKL | PLUS J ZRS REACTANCE IN OHMS | 8.00 NOMINAL |
| CRSJ | SHAFT TYPE | ROUND, SLOTTED BOTH SHAFTS |
| CRSY | ALIGNMENT HOLE DEPTH | 0.1250 INCHES MAXIMUM |
| CTCW | ALIGNMENT HOLE BOLT CIRCLE DIAMETER | 0.8750 INCHES NOMINAL |
| CWXK | SHAFT RADIAL PLAY DETERMINING WEIGHT | 4.0 OUNCES |
| CWYF | SHAFT END PLAY DETERMINING WEIGHT | 4.0 OUNCES |
| TTQY | TERMINAL TYPE AND QUANTITY | 6 WIRE LEAD |
If You’re Ever Looking for NSN parts Or Have an Aircraft On Ground Situation, Don’t forget That We offer Competitive Pricing and Guaranteed On-Time Delivery.
Request for Quote