Welcome to the NSN RFQ page on Cosmos Purchasing; from here, you may request a competitive sourcing solution for any parts of interest. As a dependable NSN part in our inventory of Generator Engine Accessory items, this component with part number 14606 and NSN 2920003912989 is available for purchase at any time. This product is manufactured by John Reiner And Co Inc, a trusted entity on our Approved Vendor List (AVL) who upholds a strict level of quality assurance in their practices. They are also a part of a larger supply network that reaches across the globe to enable expedited shipping for our customers wherever they are located.
Note : We Will Not Share Your Information To Any Third Parties.
Having been given the CAGE Code 50309, John Reiner And Co Inc follows the strict guidelines for part standardization established by the US Department of Defense. If you would like to explore similar products, we invite you to return to our page of 2920 Engine Electrical System Components Nonaircraft products or look at the list of related items below. Start the purchasing process on part number 14606 and any other items of interest today to learn all that Cosmos Purchasing can do as your sourcing partner!
| NSN | FSC | NIIN | CLS | Hazmat | DEMIL | Cancelled NSN |
|---|---|---|---|---|---|---|
| 2920-00-391-2989 Item PartTypeName: GENERATOR,ENGINE ACCESSORY | 2920 | 003912989 | 0 | N | ||
| CIIC | HCC | ESD | PMIC | Criticality | ENAC | |
| U | U | |||||
| Part Number | ISC | RNVC | RNCC | HCC | MSDS | SADC |
| MTRC0U2400 | 5 | 9 | 5 |
| MRC | Criteria | Characteristic |
|---|---|---|
| AAJF | THREAD DIRECTION | RIGHT-HAND |
| AASA | THREAD LENGTH | 0.720 INCHES NOMINAL |
| ABFF | FURNISHED ITEMS | RADIO INTERFERENCE SHIELDING AND WOODRUFF KEY |
| ABPT | SECOND STEP DIAMETER | 0.668 INCHES MINIMUM AND 0.669 INCHES MAXIMUM |
| ABRR | KEYWAY WIDTH | 0.125 INCHES NOMINAL |
| ABVA | UNTHREADED PORTION LENGTH | 1.280 INCHES MINIMUM AND 1.340 INCHES MAXIMUM |
| ACJC | MOUNTING HOLE THREAD DIRECTION | RIGHT-HAND |
| ADER | MOUNTING STYLE | BRACKET MTD W/THREE MTG HOLES,TOP HOLE THREADED |
| ADZC | ENVIRONMENTAL PROTECTION | DUSTPROOF AND CORROSION RESISTANT AND FUNGUS RESISTANT |
| AFYS | KEYWAY LENGTH | 0.625 INCHES NOMINAL |
| AHZV | SUBMERSIBILITY | NONSUBMERSIBLE |
| AKCT | SHAFT ROTATION DIRECTION | CLOCKWISE |
| ANTX | DISTANCE FROM END TO KEYWAY CENTER | 1.330 INCHES MINIMUM AND 1.390 INCHES MAXIMUM |
| AWDP | THREAD DIAMETER | 0.500 INCHES NOMINAL |
| AXHX | GROUND POLARITY TYPE | NEGATIVE |
| BCGD | ARMATURE MINIMUM SPEED IN RPM AT FULL CURRENT OUTPUT | 1950 |
| BCGF | MAXIMUM OUTPUT CURRENT RATING IN AMPS | 18.0 |
| BCGN | GROUNDING METHOD | INTERNAL |
| BCGS | SHAFT DRIVE END STYLE | STRAIGHT SHAFT END,THREADED,W/KEYWAY |
| BCLY | DISTANCE BETWEEN SHAFT CENTER AND BOTTOM MOUNTING HOLE CENTER | 3.875 INCHES NOMINAL |
| BCLZ | DISTANCE BETWEEN SHAFT CENTER AND TOP MOUNTING HOLE CENTER | 3.500 INCHES NOMINAL |
| BCMB | ANGULAR DEVIATION OF FIRST HOLE FROM TOP CENTER IN DEG | 180.0 |
| BCMC | ANGULAR DEVIATION OF SECOND HOLE FROM FIRST HOLE IN DEG | 159.0 |
| BCMD | DISTANCE BETWEEN INSIDE SURFACES OF HINGE BRACKET | 7.243 INCHES MINIMUM AND 7.257 INCHES MAXIMUM |
| BCMF | DISTANCE BETWEEN OUTSIDE SURFACES OF HINGE BRACKET | 8.103 INCHES MINIMUM AND 8.197 INCHES MAXIMUM |
| BCMH | BOTTOM MOUNTING HOLE DIAMETER | 0.447 INCHES MINIMUM AND 0.459 INCHES MAXIMUM |
| BCND | MAXIMUM RATED ARMATURE SPEED IN RPM | 4000 |
| BZRR | THREAD SERIES | UNF |
| CFHL | THREAD CLASS | 2A |
| CMLK | MOUNTING HOLE THREAD SERIES DESIGNATOR | UNC |
| CMLL | MOUNTING HOLE THREAD DIAMETER | 0.375 INCHES NOMINAL |
| CMLM | MOUNTING HOLE THREAD QUANTITY PER INCH | 16 |
| CMLN | MOUNTING HOLE THREAD CLASS | 2B |
| CMLP | THREAD QUANTITY PER INCH | 20 |
| ELEC | VOLTAGE IN VOLTS | 28.0 |
| TEST | TEST DATA DOCUMENT | 81349-MIL-G-12604 SPECIFICATION (INCLUDES ENGINEERING TYPE BULLETINS,BROCHURES,ETC.,THAT REFLECT SPECIFICATION TYPE DATA IN SPECIFICATION FORMAT; EXCLUDES COMMERCIAL CATALOGS,INDUSTRY DIRECTORIES,AND SIMILAR TRADE PUBLICATIONS,REFLECTI |
| ZZZT | NONDEFINITIVE SPEC/STD DATA | B CLASS AND 2 GRADE AND B GROUP |
If You’re Ever Looking for NSN parts Or Have an Aircraft On Ground Situation, Don’t forget That We offer Competitive Pricing and Guaranteed On-Time Delivery.
Request for Quote