Welcome to the NSN RFQ page on Cosmos Purchasing; from here, you may request a competitive sourcing solution for any parts of interest. As a dependable NSN part in our inventory of Bearing Ball Rod End items, this component with part number MS21151-10C and NSN 3110011261292 is available for purchase at any time. This product is manufactured by Military Standards Corp, a trusted entity on our Approved Vendor List (AVL) who upholds a strict level of quality assurance in their practices. They are also a part of a larger supply network that reaches across the globe to enable expedited shipping for our customers wherever they are located.
Note : We Will Not Share Your Information To Any Third Parties.
Having been given the CAGE Code 96906, Military Standards Corp follows the strict guidelines for part standardization established by the US Department of Defense. If you would like to explore similar products, we invite you to return to our page of 3110 Bearings Antifriction Unmounted products or look at the list of related items below. Start the purchasing process on part number MS21151-10C and any other items of interest today to learn all that Cosmos Purchasing can do as your sourcing partner!
| NSN | FSC | NIIN | CLS | Hazmat | DEMIL | Cancelled NSN |
|---|---|---|---|---|---|---|
| 3110-01-126-1292 Item PartTypeName: BEARING,BALL,ROD END | 3110 | 011261292 | 0 | N | ||
| CIIC | HCC | ESD | PMIC | Criticality | ENAC | |
| U | A | |||||
| Part Number | ISC | RNVC | RNCC | HCC | MSDS | SADC |
| AS21151 | 6 | 1 | 3 |
| MRC | Criteria | Characteristic |
|---|---|---|
| AAJD | THREAD CLASS | 3A |
| AAJF | THREAD DIRECTION | RIGHT-HAND |
| AAZE | SHANK DIAMETER | 0.3750 INCHES NOMINAL |
| AAZF | SHANK STYLE | EXTERNALLY THREADED |
| ABHP | OVERALL LENGTH | 3.0630 INCHES NOMINAL |
| ABXV | BORE DIAMETER | 0.3122 INCHES MINIMUM AND 0.3125 INCHES MAXIMUM |
| ADGA | OVERALL OUTSIDE DIAMETER | 1.2400 INCHES MINIMUM AND 1.2600 INCHES MAXIMUM |
| AGGY | SHANK THREAD LENGTH | 1.5320 INCHES MINIMUM AND 1.5940 INCHES MAXIMUM |
| AGVT | OUTER RING WIDTH | 0.6460 INCHES MINIMUM AND 0.6660 INCHES MAXIMUM |
| AGVU | INNER RING WIDTH | 0.8650 INCHES MINIMUM AND 0.8700 INCHES MAXIMUM |
| AGXH | LENGTH FROM BORE CENTER TO SHANK END | 2.4280 INCHES MINIMUM AND 2.4480 INCHES MAXIMUM |
| AGYJ | SEAL QUANTITY | 2 |
| AGYW | BEARING SEAL TYPE | CONTACT |
| AGZA | ALIGNMENT TYPE | SELF-ALIGNING |
| AHAW | SELF-ALIGNMENT LOCATION | INTERNAL |
| CMLP | THREAD QUANTITY PER INCH | 24 |
| CQJX | NOMINAL THREAD SIZE | 0.375 INCHES |
| CTLK | SELF-ALIGNMENT ANGLE | 10.00 DEGREES NOMINAL |
| FEAT | SPECIAL FEATURES | 80 PCT FULL OF SPECIFIED LUBRICANT; STANDARD NAS 513 KEYWAY IN SHANK |
| LBMA | LUBRICATION MATERIAL | GREASE |
| LMDC | LUBRICATION MATERIAL DOCUMENT AND CLASSIFICATION | MIL-G-81322 MIL SPEC SINGLE MATERIAL RESPONSE |
| MATT | MATERIAL | PLASTIC POLYTETRAFLUOROETHYLENE OR PLASTIC POLYTETRAFLUOROETHYLENE AND GLASS FIBER SEAL |
| MATT | MATERIAL | STEEL COMP 4130 OR STEEL COMP 8620 OUTER RING |
| MATT | MATERIAL | STEEL COMP 4130 OR STEEL COMP 8620 ROD END BODY |
| MATT | MATERIAL | STEEL COMP E52100 BALL |
| MATT | MATERIAL | STEEL COMP E52100 INNER RING |
| MATT | MATERIAL | STEEL COMP E52100 RETAINER |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | AISI ASSN STD SINGLE MATERIAL RESPONSE RETAINER |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | AMS3652 ASSN STD 1ST MATERIAL RESPONSE OR AMS3666 ASSN STD 2ND MATERIAL RESPONSE SEAL |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | MIL-S-6758 MIL SPEC 1ST MATERIAL RESPONSE OR MIL-S-8690 MIL SPEC 2ND MATERIAL RESPONSE OUTER RING |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | MIL-S-6758 MIL SPEC 1ST MATERIAL RESPONSE OR MIL-S-8690 MIL SPEC 2ND MATERIAL RESPONSE ROD END BODY |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | MIL-S-7420 MIL SPEC SINGLE MATERIAL RESPONSE BALL |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | MIL-S-7420 MIL SPEC SINGLE MATERIAL RESPONSE INNER RING |
| SFTT | SURFACE TREATMENT | CADMIUM ALL EXTERNAL/EXPOSED METAL SURFACES |
| STDC | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | QQ-P-416,TY 1,CL 2 FED SPEC SINGLE TREATMENT RESPONSE ALL EXTERNAL/EXPOSED METAL SURFACES |
| STYL | STYLE DESIGNATOR | DOUBLE ROW,STAGGERED,BALL |
| THSD | THREAD SERIES DESIGNATOR | UNJF |
If You’re Ever Looking for NSN parts Or Have an Aircraft On Ground Situation, Don’t forget That We offer Competitive Pricing and Guaranteed On-Time Delivery.
Request for Quote