Welcome to the NSN RFQ page on Cosmos Purchasing; from here, you may request a competitive sourcing solution for any parts of interest. As a dependable NSN part in our inventory of Resolver Electrical items, this component with part number CWH-10-AS-1 and NSN 5990008195615 is available for purchase at any time. This product is manufactured by Moog Inc, a trusted entity on our Approved Vendor List (AVL) who upholds a strict level of quality assurance in their practices. They are also a part of a larger supply network that reaches across the globe to enable expedited shipping for our customers wherever they are located.
Note : We Will Not Share Your Information To Any Third Parties.
Having been given the CAGE Code 99932, Moog Inc follows the strict guidelines for part standardization established by the US Department of Defense. If you would like to explore similar products, we invite you to return to our page of 5990 Synchros and Resolvers products or look at the list of related items below. Start the purchasing process on part number CWH-10-AS-1 and any other items of interest today to learn all that Cosmos Purchasing can do as your sourcing partner!
| NSN | FSC | NIIN | CLS | Hazmat | DEMIL | Cancelled NSN |
|---|---|---|---|---|---|---|
| 5990-00-819-5615 Item PartTypeName: RESOLVER,ELECTRICAL | 5990 | 008195615 | 0 | N | ||
| CIIC | HCC | ESD | PMIC | Criticality | ENAC | |
| U | U | |||||
| Part Number | ISC | RNVC | RNCC | HCC | MSDS | SADC |
| CWH-10-AS-1 | 6 | 2 | 5 |
| MRC | Criteria | Characteristic |
|---|---|---|
| AAQL | BODY STYLE | STANDARD ROUND C |
| AAVL | PILOT DIAMETER | 0.5000 INCHES MAXIMUM |
| ABKU | FLANGE THICKNESS | 0.0620 INCHES NOMINAL |
| ABPA | UNDERCUT DIAMETER | 0.8400 INCHES NOMINAL |
| ABPC | UNDERCUT WIDTH | 0.0620 INCHES NOMINAL |
| ABWV | SHAFT DIAMETER | 0.0900 INCHES MAXIMUM SINGLE SHAFT |
| ABXF | SHAFT LENGTH | 0.3370 INCHES NOMINAL SINGLE SHAFT |
| AEBZ | SCHEMATIC DIAGRAM DESIGNATOR | 2 ROTOR,1 STATOR |
| AFJN | FRAGILITY FACTOR | MODERATELY RUGGED |
| AGAV | END ITEM IDENTIFICATION | 316-1 |
| AHCG | MAXIMUM TEMP RISE | 20.0 DEG CELSIUS |
| AJSL | BODY SIZE | 10 |
| AJSQ | STATOR INPUT ELECTRICAL POWER RATING | 210.0 MILLIWATTS NOMINAL |
| AJSR | ROTOR INPUT VOLTAGE RATING IN VOLTS | 26.0 NOMINAL |
| AJSS | FREQUENCY IN HERTZ | 400.0 NOMINAL |
| AJST | ROTOR INPUT CURRENT RATING | 38.0 MILLIAMPERES NOMINAL |
| AJSW | ZRO RESISTANCE IN OHMS | 155.00 NOMINAL |
| AJTA | ZRS RESISTANCE IN OHMS | 215.00 NOMINAL |
| AJTS | ROTOR DC RESISTANCE IN OHMS | 110.00 NOMINAL |
| AJTT | STATOR DC RESISTANCE IN OHMS | 28.00 NOMINAL |
| AJVF | PHASE SHIFT ANGLE IN DEG | 10.000 INPUT TO OUTPUT NOMINAL |
| AJVH | MAXIMUM TOTAL NULL VOLTAGE OUTPUT IN MILLIVOLTS PER VOLT | 1.00 |
| AJVJ | INTERAXIS ERROR ANGULAR RANGE IN MINUTES | -1.0/1.0 |
| AJVL | ELECTRICAL ERROR ANGULAR RANGE IN MINUTES | -15.0/15.0 |
| AJVT | ACTUATOR FRICTION TORQUE AT PLUS 25 DEG CELSIUS | 4.0 CENTIMETER-GRAMS MAXIMUM |
| AJVW | ALIGNMENT HOLE QUANTITY | 3 |
| AJWE | SHAFT RADIAL PLAY TEST POINT | 0.125 INCHES MAXIMUM |
| AJWG | SHAFT MAXIMUM RADIAL PLAY | 0.0005 INCHES |
| AJWH | SHAFT END PLAY | 0.0003 INCHES MINIMUM AND 0.0008 INCHES MAXIMUM |
| AJXB | SHAFT MAXIMUM RUNOUT | 0.0010 INCHES |
| CQXQ | PLUS J ZRO REACTANCE IN OHMS | 665.00 NOMINAL |
| CRKL | PLUS J ZRS REACTANCE IN OHMS | 70.00 NOMINAL |
| CRSJ | SHAFT TYPE | ROUND,SLOTTED SINGLE SHAFT |
| CWXK | SHAFT RADIAL PLAY DETERMINING WEIGHT | 4.0 OUNCES |
| CWYF | SHAFT END PLAY DETERMINING WEIGHT | 8.0 OUNCES |
| TTQY | TERMINAL TYPE AND QUANTITY | 6 WIRE LEAD |
| AAFZ | BODY MATERIAL | ALUMINUM |
| AAVH | SHOULDER DIAMETER | 0.8123 INCHES MAXIMUM |
| ABHP | OVERALL LENGTH | 1.6310 INCHES MAXIMUM |
| ABKK | FLANGE DIAMETER | 0.9370 INCHES MAXIMUM |
| AJSN | STATOR INPUT VOLTAGE RATING IN VOLTS | 11.8 NOMINAL |
| AJSP | STATOR INPUT CURRENT RATING | 72.0 MILLIAMPERES NOMINAL |
| AJSV | ROTOR INPUT ELECTRICAL POWER RATING | 224.0 ALLQJAA3.500 FINISHED-CHAMFERED |
| AJSY | ZSO RESISTANCE IN OHMS | 41.00 NOMINAL |
| AJVS | ACTUATOR FRICTION TORQUE AT MINUS 55 DEG CELSIUS | 16.0 CENTIMETER-GRAMS MAXIMUM |
| AJWQ | PILOT LENGTH | 0.0380 NOMINAL INCHES |
| AJWR | SHOULDER LENGTH | 0.0620 NOMINAL INCHES |
| AJWX | MOUNTING SURFACE TO TERMINAL END DISTANCE | 1.2410 INCHES MAXIMUM |
| CQTM | TERMINAL LOCATION | REAR |
| CQZS | SHAFT SLOT DEPTH | 0.0310 INCHES MAXIMUM SINGLE SHAFT |
| CRGZ | PLUS J ZSO REACTANCE IN OHMS | 159.00 NOMINAL |
| CRHN | SHAFT SLOT WIDTH | 0.0310 INCHES MAXIMUM SINGLE SHAFT |
| CRSY | ALIGNMENT HOLE DEPTH | 0.0500 INCHES MAXIMUM |
| CTCW | ALIGNMENT HOLE BOLT CIRCLE DIAMETER | 0.6780 INCHES NOMINAL |
If You’re Ever Looking for NSN parts Or Have an Aircraft On Ground Situation, Don’t forget That We offer Competitive Pricing and Guaranteed On-Time Delivery.
Request for Quote