Welcome to the NSN RFQ page on Cosmos Purchasing; from here, you may request a competitive sourcing solution for any parts of interest. As a dependable NSN part in our inventory of Synchroreceiver items, this component with part number 11TR022-2945 and NSN 5990000222945 is available for purchase at any time. This product is manufactured by Motion Devices Technology Inc, a trusted entity on our Approved Vendor List (AVL) who upholds a strict level of quality assurance in their practices. They are also a part of a larger supply network that reaches across the globe to enable expedited shipping for our customers wherever they are located.
Note : We Will Not Share Your Information To Any Third Parties.
Having been given the CAGE Code 2X130, Motion Devices Technology Inc follows the strict guidelines for part standardization established by the US Department of Defense. If you would like to explore similar products, we invite you to return to our page of 5990 Synchros and Resolvers products or look at the list of related items below. Start the purchasing process on part number 11TR022-2945 and any other items of interest today to learn all that Cosmos Purchasing can do as your sourcing partner!
| NSN | FSC | NIIN | CLS | Hazmat | DEMIL | Cancelled NSN |
|---|---|---|---|---|---|---|
| 5990-00-022-2945 Item PartTypeName: SYNCHRO,RECEIVER | 5990 | 000222945 | 0 | N | ||
| CIIC | HCC | ESD | PMIC | Criticality | ENAC | |
| U | U | 0 | ||||
| Part Number | ISC | RNVC | RNCC | HCC | MSDS | SADC |
| 1497520-0000 | 3 | 2 | 3 |
| MRC | Criteria | Characteristic |
|---|---|---|
| AAQL | BODY STYLE | STANDARD ROUND C |
| AAVH | SHOULDER DIAMETER | 0.9995 INCHES MINIMUM AND 1.0000 INCHES MAXIMUM |
| AAVL | PILOT DIAMETER | 0.6249 INCHES MINIMUM AND 0.6250 INCHES MAXIMUM |
| ABHP | OVERALL LENGTH | 1.9320 INCHES NOMINAL |
| ABKK | FLANGE DIAMETER | 1.0590 INCHES MINIMUM AND 1.0620 INCHES MAXIMUM |
| ABKU | FLANGE THICKNESS | 0.0590 INCHES MINIMUM AND 0.0650 INCHES MAXIMUM |
| ABPA | UNDERCUT DIAMETER | 0.9750 INCHES NOMINAL |
| ABPC | UNDERCUT WIDTH | 0.0500 INCHES NOMINAL |
| ABWV | SHAFT DIAMETER | 0.1220 INCHES MINIMUM AND 0.1240 INCHES MAXIMUM SINGLE SHAFT |
| ABXF | SHAFT LENGTH | 0.2500 INCHES NOMINAL SINGLE SHAFT |
| AFJN | FRAGILITY FACTOR | MODERATELY RUGGED |
| AJSL | BODY SIZE | 11 |
| AJSR | ROTOR INPUT VOLTAGE RATING IN VOLTS | 26.0 NOMINAL |
| AJSS | FREQUENCY IN HERTZ | 400.0 NOMINAL |
| AJST | ROTOR INPUT CURRENT RATING | 120.0 MILLIAMPERES NOMINAL |
| AJSV | ROTOR INPUT ELECTRICAL POWER RATING | 600.0 MILLIWATTS NOMINAL |
| AJSW | ZRO RESISTANCE IN OHMS | 44.00 NOMINAL |
| AJSY | ZSO RESISTANCE IN OHMS | 11.70 NOMINAL |
| AJTA | ZRS RESISTANCE IN OHMS | 57.00 NOMINAL |
| AJTS | ROTOR DC RESISTANCE IN OHMS | 18.00 NOMINAL |
| AJTT | STATOR DC RESISTANCE IN OHMS | 9.30 NOMINAL |
| AJVF | PHASE SHIFT ANGLE IN DEG | 4.300 INPUT TO OUTPUT NOMINAL |
| AJVN | RECEIVER ERROR ANGULAR RANGE IN MINUTES | -45.0 TO 45.0 |
| AJVS | ACTUATOR FRICTION TORQUE AT MINUS 55 DEG CELSIUS | 0.5 MILLIMETER-MILLIGRAMS NOMINAL |
| AJVV | TORQUE GRADIENT PER ANGULAR DEG | 2000.0 MILLIMETER-MILLIGRAMS MINIMUM |
| AJVW | ALIGNMENT HOLE QUANTITY | 4 |
| AJWQ | PILOT LENGTH | 0.0590 INCHES MINIMUM AND 0.0650 INCHES MAXIMUM |
| AJWR | SHOULDER LENGTH | 0.0590 INCHES MINIMUM AND 0.0650 INCHES MAXIMUM |
| AJWX | MOUNTING SURFACE TO TERMINAL END DISTANCE | 1.6200 INCHES NOMINAL |
| ALNF | SHAFT HOLE DIAMETER | 0.0897 INCHES NOMINAL SINGLE SHAFT |
| CQRG | BODY MATERIAL | STEEL CORROSION RESISTING |
| CQTM | TERMINAL LOCATION | REAR |
| CQXQ | PLUS J ZRO REACTANCE IN OHMS | 243.00 NOMINAL |
| CRGZ | PLUS J ZSO REACTANCE IN OHMS | 40.50 NOMINAL |
| CRJX | SHAFT TAPERED END MINOR DIAMETER | 0.1150 INCHES NOMINAL SINGLE SHAFT |
| CRKL | PLUS J ZRS REACTANCE IN OHMS | 28.00 NOMINAL |
| CRSJ | SHAFT TYPE | ROUND,TAPERED,HOLLOWED SINGLE SHAFT |
| CRSY | ALIGNMENT HOLE DEPTH | 0.0900 INCHES MAXIMUM |
| CSJY | TRANSFORMATION RATIO | 0.454 STATOR TO ROTOR NOMINAL |
| CSLT | SHAFT TAPER ANGLE IN DEG | 2.0 SINGLE SHAFT |
| CTCW | ALIGNMENT HOLE BOLT CIRCLE DIAMETER | 0.8090 INCHES MINIMUM AND 0.8150 INCHES MAXIMUM |
| CWAC | SHAFT TAPER LENGTH | 0.1310 INCHES NOMINAL SINGLE SHAFT |
| TTQY | TERMINAL TYPE AND QUANTITY | 5 WIRE LEAD |
If You’re Ever Looking for NSN parts Or Have an Aircraft On Ground Situation, Don’t forget That We offer Competitive Pricing and Guaranteed On-Time Delivery.
Request for Quote